Warsaw Hub
One of the most technologically advanced buildings in Poland. The building management system we have developed is based on the Delta Controls controller and software.
Orange
The BMS was visualised using the Niagara Framework software. The information collected allows a rapid response in the event of irregularities. The system allows the environmental conditions in the building to be controlled, placing particular emphasis on the server room space and the battery room. As well as collecting indications from a number of installations, including genset, fuel, water, lighting, fire, air conditioning, it includes monitoring of electrical switchgear along with indications from network analysers.
The Crown - Kraków
A hotel located in the center of Krakow managed by a BMS system created by us.
The BMS system includes:
– Monitoring and control of air handling units
– Monitoring and archiving media consumption
– Monitoring and control of facility air conditioning
– Monitoring of electrical switchboards
– Lighting monitoring and control
Ball - Czech Republic
The BMS system was visualized using the Niagara Framework software.
The BMS system includes:
– Monitoring and control of ventilation and air conditioning systems
– Monitoring of electrical switchboards
– Lighting monitoring and control
– Monitoring and control of barriers and gates within the facility
– Monitoring and control of the heat distribution center
– Media monitoring
– Daily, weekly and monthly reports on electricity consumption
– Leak detection
Tarczyński Arena
The implemented project is based on Delta Controls and Beckhoff controllers. The entire BMS is controlled from the visualisation made in the ORCA environment provided by Delta Controls.
It includes, among other things: control of passageways, information from the SSP, control of lighting inside office buildings, and turf/playground lighting.
Wrocław University of Technology - C19, C20
The main interface for the BMS operator is a desktop PC located in the security room. Tridium’s Niagara N4 visualisation system can be accessed from a browser that supports HTML5 (e.g. Chrome, FireFox, Opera, etc. in the most up-to-date versions available). The operator computer connects to the BMS (Niagara N4 visualisation server and indirectly the BECKHOFF supervisory controllers) via a dedicated facility LAN.
The BMS system includes:
– Monitoring and control of air handling units
– Monitoring and control of the heat centre
– Monitoring of utility consumption
– Monitoring and control of facility air conditioning
– On/Off fan control
– Temperature monitoring in technical rooms
– Monitoring and control of mechanical ventilation of attics
Maersk
As part of our collaboration, we visualised the BMS system for the warehouse and office building. The whole project was carried out in EcoStruxure Building Operation software from Schneider Electric. The system allows the current status of the equipment to be viewed and controlled, and also stores historical data, which is then presented in the form of graphs and lists. The statements can be downloaded as a file with a csv or xls extension and used for further analysis.
The clarity of the visualisation is ensured not only by eye-pleasing animations of the operation of the equipment, but also by clearly labelled alarms, which have a positive effect on the rapid diagnosis of problems.
Lower Silesian Innovation and Science Park
The BMS system was equipped with Beckhoff controllers and visualised using Niagara Framework software.
It allows:
– Monitoring and control of air handling units
– Inspection of fans and ventilation systems in the hall
– Overview of fan coil units
– Monitoring of technical installations (boiler house, compressor station, hydrophore, gas monitoring)
– Monitoring of electrical installations (network analysers, meters, ATS, UPS)
– DALI lighting monitoring
– Monitoring of teletechnical installations (access control, burglary and assault alarm system, CCTV)
– Monitoring of the SSP
– Notification of alarms
– Data archiving
WPT - Gamma
The completed automation system is capable of performing complex measurement, control, optimisation and monitoring functions in areas such as, inter alia, monitoring of media consumption, control of the heating system, ventilation, air conditioning, electrical installation, etc. The system has been equipped with control panels, controllers, PLCs, configurable controllers, a server and control and instrumentation components such as, among others, sensors, valves, actuators, pressure switches, thermostats, etc. Management of the technical installations, subsystems and all devices performing control and automatic control functions is carried out via an operator panel or web application.
Due to the purpose of the rooms (Biological and Chemical laboratories), the investment required special requirements including the use of chemical-resistant equipment, control of both sub- and overpressure depending on the type of laboratories, as well as gas detection with a warning system.
Opel - Gliwice
The visualisation was created with the help of software from Schneider Electric. Due to the complexity of the facility, it includes advanced alarm handling. A number of scripts have been developed to streamline the fault reporting process. Control is possible via the Ecostrucure Building Operation app and via any web browser.
Nokia
The project is based on Beckhoff controllers. The visualisation, on the other hand, was created with the help of Indusoft software. The project includes standard elements used in building automation such as control of air handling units. At the client’s request, we have introduced the transmission of alarm information via emails and sms messages
Joysonquin - Wałbrzych
The visualization is based on Delta Controls controllers. The software used to create it is the dedicated EnteliWEB from the same manufacturer.
The BMS system includes:
– Monitoring and control of air handling units
– Monitoring media consumption
– Monitoring and control of facility air conditioning
– Monitoring of electrical switchboards
– Lighting monitoring
Wrocław University of Technology - C7
The project is based on Beckhoff controllers. Visualization carried out in the manufacturer’s software for creating HMI and Scada applications – TwinCAT HMI.
Functions performed by the system:
– Monitoring and control of air handling units
– DALI lighting control (automatic regulation of lighting intensity)
– Control of the AV system in lecture halls
– Monitoring and control of mechanical ventilation
– Monitoring and archiving data from media consumption
– Weather station monitoring
– Monitoring and control of the heat distribution center
– Monitoring of electrical switchboards
Municipal Cultural Center - Długołęka
Visualization based on the Niagara Framework software enables monitoring and control of ventilation, archiving media consumption and monitoring of the heat distribution center.
